Quality Control

 
Quality Control is handled as a continuous process starting from reception of enquiries, advancing with proper material procurement, strict inspections at fabrication, safe erection at site and finalized with preparation of the Comprehensive Quality File at the end of the project. As an obligation of a company possessing EN-1090 EXC3 and ISO 3834-2 Certificates, we are applying at least the Quality Control procedures set at these standards for every fabrication. 
 
 
In addition to our standard quality procedures, we are also creating custom ITPs (Inspection Test Plans) for each project depending on the Technical Specifications provided by the Client. Even if not requested by the Client we always prepare a basic Quality File for each project.
 
From the Material Acceptance to the loading of the truck all QC process is being managed, applied and recorded by Certified Inspectors and International/European Welding Engineers. We strictly require all Mill Certificates to be 3.1 according to the EN-10204 for all materials procured and all of our welders are certified according to EN ISO 9606-1. 
 
The coating activities are monitored, measured and controlled by certified inspectors. 
We also apply NDT (Non-destructive) tests or other required tests determined at the technical specification of the Project. 
Traceability of the fabrication is guaranteed with our comprehensive QC procedure. All documentation related to all fabrications is preserved for 10 years retrospectively. 
Proko Quality System is periodically audited by Internationally Accredited Certification Bodies. 
 
Proko is your solution when quality matters...